Mar 19, 2018 - KFZ-Elektronik Schulungen. Ab sofort bieten wir in unserem Schulungsraum auch spezielle KFZ-Elektronik Schulungen an, welche.

• Uncompress the file. Double-click on 'Install.exe' to install the drivers. • Plug cable into any computer's USB port.

• 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?' Select 'Yes'. • Select 'Install the software automatically'.

• After the installation is complete, click 'Finish'. • 'Found New Hardware Wizard' will start once again because there are two drivers for this cable. • Go through the same steps as explained above to install this second driver. If install is successful, move onto Step 2. If installation fails, see below: Troubleshooting: If Drivers Failed To Install. Installation failed?. Unextract the file into any folder.

Then while your cable is connected to the computer — go Device Manager. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.

Right-click and choose 'Update Driver Software'. Like this: Then select the location where you unextracted Driver Pack 2. Let it install. La noire pc activation code generator. STEP 2: Discover Port Number that VAG-COM KKL Cable is Using Go to Control Panel. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager Expand 'Other devices' or 'Ports (COM & LPT)'. Whichever contains 'USB Serial Port'.

Next to 'USB Serial Port' — you'll see a number. If the COM port number is between 1-4, then everything is fine. Move onto Step 3.

If the COM port number is above 4, then we'll have to change it so it's between 1-4. Right-click on 'USB Serial Port' and click on 'Properties' — as per below pic: Then: • Click: Port Settings • Click: Advanced • For 'COM Port Number' — you MUST choose any number between 1-4. Now let's test if everything is working. Move onto next step below. STEP 3: Test Everything is Working Cable should be plugged into computer.

• Start VCDS-Lite software. • Click 'Options' button.

• You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2. • Click the ‘Test’ button.

• If everything is good, it should display 'Interface Status: Found!' • You can now connect other end of cable to car. Turn on ignition. And you're ready to start diagnosing! If test is not successful — check the following: • Other software or devices using USB ports or that same COM Port could be conflicting. You should uninstall the suspected software or device for troubleshooting this problem.

• It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. • Cable must be plugged into the vehicle with ignition ON. • Test the cable with each COM Port from 1 to 4 in Windows Device Manager. • Make sure that the driver is installed and configured as explained in Step 1. More Troubleshooting Tips: • Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.